Foil Quill Settings for Silhouette
The Foil Quill is a new tool that can be used with the Silhouette machines (along with other cutting machines) to add foil to paper, imitation leather, and even vinyl!
The Foil Quill is getting a lot of buzz in the craft world even while it'southward still on pre-order (we recommend purchasing through Swing Design). In this Foil Quill unboxing tutorial I'll show yous exactly what's in the box along with how to set the foil quill and provide the best Silhouette cutting settings.
Unboxing the Foil Quill: What'due south Included
In that location are three unlike size foil quills: fine tip, standard tip, and wide tip. They can be purchased together every bit a kit or individually.
Whether you lot purchase them individually or together as office of the Foil Quill kit, they all include four different machine adapters so they can exist used in either the Silhouette machines (CAMEO, Portrait, or Curio), the Cricut machines, Brother Scan N Cutting and Sizzix.
Foil Quill Kit
The Foil Quill kit includes not only all three size foil quill tips and four adapters, but as well 3 rolls of reactive foil, a roll of tape, and a small metal heat shield.
Heat Reactive Foil
The foil quill tips heat up using an attached USB cord and when run over heat reactive foil attach the foil to the surface below. The foils tin besides be purchased separately or in bundles and come up in a broad diversity of colors (this is a big advantage over the 1-footstep Silhouette foil material which is only available in iii colors).
Materials that can be foiled include paper, leather, vellum, and even vinyl. Go on in mind the material where the foil is being placed, must be able to fit nether the Silhouette rollers.
Tape
Record is needed to keep the sheet of foil in place while the heated foil quills draws over it applying it to the surface.
Rut Shield
The heat shield is used to protect the surface below the tip while the quill is heating upwardly.
Individual Foil Quill Tips: Fine, Standard, Wide
When purchasing the individual size foil quill tools you volition receive the tool and all four machine adapters.
Designs for the Foil Quill
The Foil Quill will work with any font or cut file - including SVGs and Silhouette Studio designs. It's important to know that the quill will piece of work just like a Silhouette sketch pen or blade applying foil EXACTLY and But where the cutting lines are showing. That means the quill will Not fill a blueprint with foil nor volition information technology fill in a font.
For this reason, single line/drawing fonts and designs specifically designed for sketching or foiling - similar these on And so Fontsy - are ideal as they volition Not result in an outline. And so Fontsy's foil quill and sketch designs include both the SVG and DXF file blazon. DXF tin be opened with standard Silhouette Studio.
I would therefore NOT recommend Silhouette users, who do not have Silhouette Studio Designer Edition or higher buy the Foil Quill USB pollex drives offered by We R Retention Keepers.
The reason is, currently, these USBs include SVG designs and PNG designs. Since SVG designs can't exist imported with standard Silhouette Studio, those users will need to import the PNG files. Merely in order to utilise PNG files the blueprint needs to be traced to create a cutting line and when you trace you always become an outline and that defeats the whole purpose of the single line pattern.
Foil Quill Set Up with Silhouette
Earlier you put your foil quill into your cut car, notice the correct adapter. Silhouette users desire to use the A adapter. Slide it onto the quill tool and and then screw it on so it's hand tight.
Place the quill into the tool carriage in the Silhouette machine. It volition fit in all CAMEOs, Portraits, and the Curio.
If you lot purchased the foil quill kit and have the metal rut shield, slide it nether the tip to protect the surface below.
The USB cease should be plugged into an outlet or power strip and NOT the USB port on the side of the CAMEO. The power supply is what allows the tool to rut upward and the Silhouette machines were not designs to handle this so I would NOT recommend it.
Allow the tool to oestrus upwards for v minutes.
While you're waiting, put your textile on your Silhouette cutting mat. Position a piece of foil over your material ensuring it's placed covering the full areas where the design is to be foiled.
TIP: I would recommend placing the material towards the bottom of the cutting mat. This volition allow you to remove the foil sheet while the mat is still loaded in the automobile if y'all also need to cut the textile in a 2nd and separate pass.
Use washi record or the tape included with the foil quill gear up to agree the foil in place. When taping the foil into place, try to proceed information technology as smoothen and taunt every bit possible. The easiest way to do this is to place half the tape onto the foil first then pull it tight equally you printing it onto paper, etc.
Best Silhouette Cut Settings for Foil Quill
The Foil Quill can be used on more than just paper! It works beautifully on vinyl and faux leather as well.
No matter which fabric you utilise you lot want both the tool and the action to exist "Sketch" rather than cutting. However, in lodge to select 'sketch' equally the action in the Transport console you'll need to pick a "sketchable" material (picking vinyl, for example won't fifty-fifty give you the option to pick sketch).
Silhouette Cut Settings for Foil Quill on Cardstock
When foiling on newspaper, place a piece of chipboard nether the cardstock every bit a"shim" to increase the thickness and add together force per unit area under the expanse where the foil will be applied. I got dramatically improve results when calculation the shim.
I plant the best Silhouette cut settings for cardstock with the Foil Quill to be:
Check out how beautiful the foil quill works on paper!
Silhouette Cutting Settings for Foil Quill on Vinyl
As crazy as it sounds, y'all can foil on vinyl using the foil quill.
I foiled onto Oracal 651 and got stunning results! The foil did NOT come upward on the transfer tape when transferring!
Silhouette Cut Settings for Foil Quill on Imitation Leather
Y'all can currently society the Foil Quill on pre-order through Swing Pattern. Shipping is expected in late Feb pending any delays past the manufacturer.
Annotation: This mail service may contain affiliate links. Past clicking on them and purchasing products through my links, I receive a small commission. That's what helps fund Silhouette School so I tin can keep buying new Silhouette-related products to testify you how to get the most out of your machine!
Become Silhouette School lessons delivered to your e-mail inbox! Select Once Daily or Weekly.
Source: https://www.silhouetteschoolblog.com/2019/02/foil-quill-unboxing-set-up-and-best.html
0 Response to "Foil Quill Settings for Silhouette"
Post a Comment